§ 20-109. Schedule of signs permitted.

The following is the schedule of signs permitted in the zones listed:

(1)

Permanent type signs are permitted as follows:

Type sign		Zone permitted	Maximum area	Spacing standards
a.	Name plate	All residential districts	2 sq. ft.	—
		All districts except residential	No restriction	—
b.	Institutional sign	All residential districts	30 sq. ft.	—
		All districts except residential	No restriction	—
c.	Business sign	Specific use permit in district	No restriction except as hereinafter provided for certain districts and types	—
		Permitted in NS, R, C, CA, I and PD districts		—
d.	Agricultural sign	Permitted in A, R, C, CA, I and PD districts	100 sq. ft.	200 ft. between signs

 

(2)

Temporary type signs are permitted as follows:

Type sign		Zone permitted	Maximum area	Spacing standards
a.	Real estate sign	All residential districts	8 sq. ft.	One for each platted lot or tract and one for each 200 ft. of street or highway frontage for acreage.
		In all districts except residential	No restriction	None specified
b.	Construction sign	In all districts	60 sq. ft.	None
c.	Development sign	In all districts	200 sq. ft.	One per project or one for each 100 acres in project
		In single-family, two-family and multiple-family district subject to approval of building official as provided otherwise in this chapter

 

(3)

In a PD. Planned development district, the sign standards shall be specified in the amending ordinance.

(4)

No sign shall be constructed to exceed the maximum building height permitted in the specific district where the sign is located except in shopping centers or similar commercial or office centers containing six (6) acres or more where pylon or major identification signs not to exceed seventy-five (75) feet in height may be erected when set back from the side and rear property line a distance equal to the height of the sign.

(Ord. No. 84-109, §§ 1—4, 5-8-84)